Nostalgia Electrics Popcorn Poppers CCP 200 User Manual

All products are trademarks of Nostalgia Products Group, LLC.  
Worldwide design & utility patented or patents pending.  
© 2009 Nostalgia Products Group, LLC.  
(rev. 08/21/09)  
 
CONTENTS  
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . 2  
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . 2  
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . 3  
PARTS & ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . 4  
HOW TO OPERATE . . . . . . . . . . . . . . . . . . . . . . . 8  
HELPFUL TIPS . . . . . . . . . . . . . . . . . . . . . . . . . 9  
CLEANING & MAINTENANCE . . . . . . . . . . . . . . . . . 9  
RECIPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
RETURNS & WARRANTY . . . . . . . . . . . . . . . . . . . . 10  
SAFETY  
Your safety and the safety of others are very important.  
We have provided many important safety messages in this manual and  
on your appliance. Always read and obey all safety messages.  
This is the safety alert symbol.  
This symbol alerts you to potential hazards  
that can kill or hurt you and others.  
All safety messages will follow the safety alert symbol.  
All safety messages will tell you what the potential hazard  
is, tell you how to reduce the chance of injury, and tell you  
what can happen if the instructions are not followed.  
Appliance Specifications:  
120 Volts, 60 Hz  
325 Watts, 2.71 Amps  
1
 
IMPORTANT PRECAUTIONS  
1. NEVER immerse in water.  
2. NEVER use near water.  
3. NEVER use an abrasive sponge nor cloth.  
4. NEVER use a scouring pad on the appliance.  
5. NEVER leave appliance unattended while in use.  
6. NEVER force Kettle in nor out of the brackets as this may cause gears  
to become misaligned and appliance will not operate properly.  
7. Unplug unit from outlet when not in use and during cleaning.  
8. DO NOT operate this appliance with a damaged cord nor  
plug, nor if the appliance ever malfunctions.  
9. DO NOT clean any parts of this appliance in a dishwasher.  
10. Keep out of reach of children.  
11. This appliance is NOT A TOY.  
12. Unsupervised young children and cognitively challenged  
individuals should never operate this appliance.  
13. Young children should be supervised while in proximity of the  
appliance to ensure that they do not play with it.  
IMPORTANT SAFEGUARDS  
Basic safety precautions should always be followed when  
using electrical appliances, including the following:  
1. Read all instructions before operating this appliance.  
2. Keep door of Main Unit closed while operating. Do not  
touch Kettle while operating; it gets very HOT.  
3. To protect against electrical shock do not immerse cord, plug  
or any part of this appliance in water or other liquids.  
4. Close supervision is necessary when any appliance is used near children.  
5. Unplug from outlet when not in use, before removing parts and before cleaning.  
6. DO NOT operate any appliance with a damaged cord nor plug,  
nor if the appliance has been damaged in any manner. Return the  
appliance to the nearest repair shop for examination or repair.  
7. The manufacturer does not recommend the use of accessory  
attachments. Use of accessory attachments may cause injuries.  
8. DO NOT use outdoors.  
9. Position the appliance as close to the outlet as possible  
to prevent injury due to tripping over cord.  
10. DO NOT leave Kettle motor running once popping has ceased.  
2
 
11. Extreme caution must be used when moving this appliance.  
12. DO NOT use the appliance for other than its intended use.  
13. An appliance that is plugged into an outlet should  
not be left unattended while in operation.  
14. Check Kettle for presence of foreign objects prior to use.  
15. Make sure the Kettle is properly attached to brackets before  
operating and that the motor plug is plugged into the Kettle.  
16. A short power supply cord is provided to reduce the risk resulting  
from becoming entangled or tripping over a long cord.  
17. Longer detachable power supply cords can be used if care is exercised in their use.  
18. The marked electrical rating of an extension cord should be at  
least as great as the electrical rating of the appliance.  
19. This appliance has a polarized plug (one blade is wider than  
the other). To reduce the risk of electrical shock, this plug is  
intended to fit into a polarized outlet only one way.  
20. Save these instructions!  
INTRODUCTION  
Thank you for purchasing the OLD FASHIONED MOVIE TIME POPCORN  
CART™, a product in Nostalgia Electrics’ Vintage Series™. This 48” tall  
vendor-style popcorn cart will be the hit of every party. It pops up to two  
quarts of hot, fresh, kettle cooked popcorn per batch. Providing a vintage  
look and feel, reminiscent of silent movie houses and carnivals circa-early  
1900’s, the OLD FASHIONED MOVIE TIME POPCORN CART™ is designed  
for home use. It features a large, stainless steel kettle with a built-in stirring  
system and kernel catcher to keep unpopped kernels out of each perfect  
batch. There is a compartment in the base of the unit to store supplies, making  
it easy to keep the cart well stocked and organized. The OLD FASHIONED  
MOVIE TIME POPCORN CART™ has an easy-to-clean design and is  
approved for commercial use. Its accessible height makes serving a snap.  
3
 
PARTS & ASSEMBLY  
Hardware  
#1 Screw (10mm)  
#2 Bolt (10mm)  
Qty. 6  
#3 Bolt (20mm)  
Qty. 4  
#4 Stud (65mm)  
Qty. 4  
Qty. 4  
#5 Flat Washer  
Qty. 8  
#6 Nut Cap  
Qty. 6  
4
 
Assembly  
(A) Main Unit  
(B) Kernel Measuring  
Cup  
(C) Storage  
Compartment  
(D) Oil Measuring  
Spoon  
(E) Push Handle  
(F) Axle Rod  
(G) Wheel  
(H) Wrench  
(I) Base Support  
(J) Bottom Plate  
(K) Cross Bar  
(L) Leg Assembly  
(M) Popcorn Scoop  
5
 
Assembly of Base Support  
1. Push Handle (E) attaches onto the Storage  
Compartment (C) using supplied #1 Screws.  
2. Insert Cross Bar (K) into the square inserts on the inside of Base Support (I)  
and secure from below with #2 Bolts. Insert the Leg Assembly (L) over the  
protruding ends of the Base Support (I) and fasten #4 Studs and #6 Nut Cap.  
3. Secure Bottom Plate (J) of the Storage Compartment (C) to Base  
Support (I) using four #2 Bolts. Open Storage Compartment (C)  
door to help support Bottom Plate (J) with your hand.  
4. Assemble Base Support (I) into the bottom of the Storage  
Compartment (C) and secure with #3 Bolts.  
6
 
Assembly of Wheels  
1. Insert Axle Rod (F) into Base Support (I).  
2. Put on #5 Flat Washer. Slide Wheel (G) into Axle Rod (F)  
and add a second #5 Flat Washer.  
3. Use Wrench (H) to tighten the #6 Nut Cup.  
4. Add #5 Flat Washer, second Wheel (G), another #5 Flat Washer, and #6 Nut  
Cap to the other side of the Axle Rod (F), following the directions above.  
5. Use Wrench (H) to tighten the #6 Nut Cap.  
(H)  
Wrench  
(F)  
Axle  
Rod  
(#5)  
Flat  
Washer  
(#6)  
Nut  
Cap  
(I)  
Base  
(G)  
Wheel  
Support  
Assembly of Main Unit  
1. Place Main Unit (A) onto the top of the Storage Compartment (C).  
2. Ensure that the two inserting pins at the bottom of the Main  
Unit (A) line up correctly so that Main Unit (A) can be locked  
under the beam of the Storage Compartment (C).  
7
 
HOW TO OPERATE  
Before first use, clean the inside of the unit by wiping with a moist,  
non-abrasive sponge, towel or cloth and then wipe with a non-  
abrasive dry towel. Wipe down the inside of the Kettle and be  
sure it is properly placed in the brackets before starting.  
ON / OFF &  
Light Switches  
Crank Handle  
Stainless Steel Kettle  
1. First, find a flat surface near an electrical outlet before  
starting. Make sure your cord is away from any water source.  
It is acceptable to use an extension cord if needed.  
2. Gather your popcorn making supplies: popcorn, seasonings, bowls or bags for  
holding the popcorn, cooking oil, Kernel Measuring Cup and Oil Measuring Spoon.  
(Kernel Measuring Cup and Oil Measuring Spoon are included with your unit).  
3. Plug in the appliance while switch is flipped to OFF position.  
4. Make sure Kettle is properly secured in support brackets.  
5. Make sure Kettle motor is plugged in.  
6. Turn appliance ON by flipping the switch on the top of the  
machine (see illustration above for location of switches). Allow  
the appliance to run 3-5 minutes to heat up Kettle.  
7. Turn unit OFF.  
8. Use the Oil Measuring Spoon supplied with your OLD FASHIONED MOVIE TIME  
POPCORN CART™ to add 2 teaspoons of your favorite popcorn cooking oil to  
the Kettle. For best popping results, it is suggested to use light vegetable oil.  
9. Add popcorn kernels to the Kettle using supplied Kernel Measuring Cup.  
10. Turn the unit ON and close the door. In no time at all, you will  
hear the popping begin. Fresh, hot popcorn will begin to burst  
out of the flip lids on the Kettle - just like at the theater!  
8
 
HELPFUL TIPS  
SMOKING  
If your OLD FASHIONED MOVIE TIME POPCORN CART™ begins to  
smoke during cooking, it may be due to grease build up. In order to reduce  
smoking, make sure that you clean the inside of the Kettle between uses.  
CLEANING & MAINTENANCE  
1. Make sure appliance is unplugged before cleaning. Unplug the outer plug  
to the outlet as well as the Kettle motor plug inside the Main Unit.  
2. Use slightly damp, non-abrasive sponge, towel or cloth to wipe down the  
inside and outside of Main Unit, then wipe with a non-abrasive towel to dry.  
3. Unplug Kettle motor and remove Kettle from support brackets.  
4. Take Kettle out of the Main Unit. After removing Kettle from  
Main Unit, fill 2/3 of Kettle with hot, soapy water.  
5. Let the Kettle sit for 15 – 20 minutes to cut the grease. (time may vary – use  
your own judgment depending on the amount of cleaning necessary)  
6. Empty water. If necessary, use the scrubber side of a  
cleaning sponge to scrub inside of Kettle.  
7. Rinse inside carefully and dry.  
8. Wipe outside of Kettle with damp cloth and dry.  
NOTE: To protect the motor plug from getting wet, never immerse the Kettle  
in any liquid. Never place any parts in the dishwasher. Always wash by hand.  
RECIPES  
The OLD FASHIONED MOVIE TIME POPCORN CART™ makes hot, fresh, theater style  
popcorn every time – anytime! Enjoy your freshly popped corn in a variety of ways:  
1. Regular theater style popcorn – add butter and salt.  
2. Add a pinch of sugar and salt to popcorn for a sweet kettle corn taste.  
3. Flavored popcorn – add seasoning from any gourmet popcorn seasoning kit.  
4. Sprinkle parmesan cheese, salt and pepper.  
5. Pop and eat without any seasonings, if you prefer, for a healthy, fiber-rich snack.  
9
 
RETURNS & WARRANTY  
SHOULD YOUR UNIT NOT WORK OR IS DAMAGED WHEN  
YOU FIRST TAKE IT OUT OF THE BOX, PLEASE RETURN  
IT TO THE PLACE OF PURCHASE IMMEDIATELY.  
OLD FASHIONED MOVIE TIME POPCORN CART™ / CCP-200  
Should you have any questions, please contact us via email or at the  
customer service number listed below between the hours of 8:00 AM  
and 5:00 PM, Monday through Friday, Central Standard Time.  
Distributed by:  
Nostalgia Products Group LLC  
1471 Partnership Dr.  
Green Bay, WI 54304-5685  
Customer Service  
Phone: (920) 347-9122  
Customer Service Inquiry  
fill out the Customer Service Inquiry form and click the Submit button.  
A representative will contact you as soon as possible.  
This appliance is designed and built to provide many years of satisfactory  
performance under normal household use. The distributor pledges to the  
original owner that should there be any defects in material or workmanship  
during the first 90 days of purchase, we will repair or replace the unit at  
our option. Our pledge does not apply to damages caused by shipping,  
mishandling or unit being dropped. A product deemed defective either from  
manufacturing or being mishandled is up to the distributor’s discretion.  
In order to obtain service under this warranty, please contact Nostalgia  
Products Group, LLC at the telephone number listed above or by filling out  
This warranty does not apply to re-manufactured merchandise.  
Please read these instructions carefully. Failure to comply with these instructions,  
damages caused by improper replacement parts, abuse or misuse will void this  
pledge to you and is being made in place of all other expressed warranties.  
10  
 

Miele Vacuum Cleaner S 4000 User Manual
Miele Ventilation Hood 09 704 870 User Manual
Miele Ventilation Hood DA 2210 User Manual
Miele Ventilation Hood DA 5960 W User Manual
MTD Edger 24604C User Manual
Nespresso Coffeemaker D50USBKNE User Manual
Nortel Networks Telephone Accessories M7100N User Manual
NXP Semiconductors Network Router PCA9665 User Manual
Onkyo Home Theater System TX NR818 User Manual
Optimus Clock Radio CR 315 User Manual